隨之大城市供電制造行業的飛速發展，高品質的供電管理方法已變成大城市公共事業的急需解決。智能化水網的基本建設將是推動水資源管理的有效途徑。客戶終端設備遠傳水表是智能化水互聯網的關鍵構成，也是設計中的一個關鍵環節。目前常用的機械式計量水表。采用機械式控制器記錄水，無數據交換和通訊功能，手動抄表困難，泄漏和估計時常出現。

With the rapid development of power supply manufacturing industry in big cities, high-quality power supply management methods have become the urgent need to solve the public utilities in big cities. The infrastructure of intelligent water network will be an effective way to promote water resource management. Remote water meter of customer terminal equipment is the key component of intelligent water Internet, and also a key link in the design. At present, the commonly used mechanical water meter. Using mechanical controller to record water, no data exchange and communication function, manual meter reading is difficult, leakage and estimation often occur.

遠傳水表是運用當代電子信息技術和當代傳感器技術，對水源的使用量開展精確測量，保持水源的傳送和分派。遠傳水表作用模塊中間的電流量數據信號傳送是根據電纜線保持的，這使得控制器的拆卸容易受到其他單元的影響，通常使水表成為一個整體。

Remote water meter is to use modern electronic information technology and modern sensor technology to carry out accurate measurement of water use, to maintain the transmission and distribution of water. The current data signal transmission in the action module of the remote water meter is kept according to the cable, which makes the disassembly of the controller easy to be affected by other units, usually making the water meter as a whole.

目前遠傳水表的整表構件中，智能水表的電子元器件的返修率相對性較高，內部電子元件、充電電池等非常容易損傷，當內部電子器件操縱設備不靈或毀壞時，則必須將全部智能水表拆下來，對發生故障的機械或電路部分進行拆卸及更換。又由于現有水表的內部元器件結構復雜，傳輸導線較多，進而促使安裝及拆裝的難度系數擴大，拆換與檢修艱難，檢修工作人員通常是把總體智能水表一塊兒拆換，拆換成本增加。

At present, in the whole meter components of the remote water meter, the repair rate of the electronic components of the intelligent water meter is relatively high, and the internal electronic components, rechargeable batteries, etc. are very easy to be damaged. When the operation equipment of the internal electronic components is not effective or damaged, all the intelligent water meters must be removed, and the mechanical or circuit parts that are in failure must be removed and replaced. Moreover, due to the complex structure of the internal components of the existing water meter and the large number of transmission wires, the difficulty coefficient of installation and disassembly is enlarged, and it is difficult to dismantle, replace and repair. The maintenance staff usually dismantle and replace the overall intelligent water meter together, which increases the cost of dismantling and replacing.

本文由IC卡智能水表整理，本文不代表本站觀點